THE TI PIN
The Ultimate Fatbike
Titanium craftsmanship mixed with the world's best gearbox drivetrain.
Not only do you have the Fatbike ability to ride over all types of terrain but you have a drivetrain to match. A sealed low maintenance system with no rear mech to worry about. Allowing you to go anywhere with no issues with your gears.
Read below for all the details.
FRAME AND C12 GEARBOX £3,400
Frame only are available for £1900
If you wish to buy a frame or simply ask about one, please click the BUY NOW button and email us. We will sort the rest. PLEASE NOTE: PINION GEARBOXES TAKE 12 MONTHS TO COME FROM TIME OF PLACING YOUR ORDER DUE TO DEMAND!
Whether daily commuting to the office, weekend tours or transalp by mountain bike: with 600% overall ratio, the C1.12 gearbox beats modern derailleurs by far. 12 gears are 17.7% even and finely graded, thus offering the right gear for every situation and, thanks to the low centre of gravity, the typical Pinion riding dynamics.
Pinion P1.18 gearbox_
Standard frame details.
Material: - Titanium grade 9 (3Al/2.5V)
Gearbox mounts, international Pinion Standard.
Headset Size: - Top cup = IS 42 , Lower cup = IS 52
Rear Axle: - 12 x 197mm (Bolt through axle included).
Seat Post Size: - 31.6mm
Seat Clamp Size: - 34.9mm (Included)
Dropper Post: - Internal Stealth cable routing.
Internal cable routing (Guided).
Pannier rack mounts.
Sizes: - Small, Medium, Large, X-Large (Special sizing is available)
Warranty - 5 years for the original owner.
Frame features you need to know
All our Pinion frames come with sliding dropouts for tensioning the chain. (We don't use Gates drive belts)
Integrated headset size IS42 top and IS52 lower. This type of headset does not require cups to be pressed into the frame as the bearings sit directly into the frame.
REAR HUB TYPE
The Ti Pin takes a 12 x 197mm rear hub as standard. (You can request a 177 x 12mm rear hub spacing if you wish)
The seat post size is 31.6mm and the frame can take an internal dropper post, the cable routing exits the frame just above the gearbox then is guided internally up the down tube, making it super-easy to maintain and fit.
The Ti Pin is designed around a rigid fork with an axle to crown measurement of 483mm. If you wish to fit a suspension for we recommend travel between 100 and 120mm
Recommendations include the Wren or Mastodon suspension forks, The Salsa Kingpin for the rigid option as it has cage mounts and suits the geometry of the frame.
Here is a wheel/Tyre size guide.
Rear axle width 197 x 12mm
26 x 4" to 5"
27.5 x 4.5"
29 x 3"
Note: This is a guide and some tyre manufacturers sizing can be different to the stated size. If in doubt please contact us.
The standar frame comes with 3 bottle/cage mounts.
REAR RACK MOUNTS
All frames now come with rear rack mounts as standard.
INTERNAL CABLE ROUTING
Frames come with fully guided internal cable routing (No bits of loose pipe) as standard for the main triangle. They will take outer gear and hydro hose.
ENGRAVED HEAD BADGE
All our titanium frames come with an engraved head badge.