Mr.Harry 2.jpg


The Adventure Bicycle

This is our first step away from the fatbike as we look to offer frames that are more ride specific, in this case bikepacking/adventure riding. 

As mentioned before, all of our frames are born from riders seeing a way to meet the demands of a type of riding. Our team rider Andy Deacon has achieved so much in a short time on His BowTi fatbike and this has been partially down to him switching wheels on occasions to take part on cross country races, long distance rides and so on. 

So after a few conversations the idea for a more dedicated frames came about.

Read on below...



Mr Harry is designed to take you on long journeys discovering great places in style and comfort as well as thrashing through your local cross country trails.
We opted not to follow the 650b gravel trend but stick with 29" wheels delivering mile munching comfort and also catering for tyres from 29 x 2.8 down or 700c tyres of your choice.
We opted to include features such as boost axle spacing to offer great mud clearance, dropper post cable routing, guided internal cale routing for gear and brakes, pannier rack mounts, and the ability to fit a 120mm suspension fork. 

Mr.Harry 5.jpg

Mr.Harry 5.jpg

Mr.Harry 7.jpg

Mr.Harry 7.jpg

Mr.Harry 6.jpg

Mr.Harry 6.jpg

Mr. Harry 1.jpg

Mr. Harry 1.jpg

Mr.Harry 3.jpg

Mr.Harry 3.jpg

Mr.Harry 4.jpg

Mr.Harry 4.jpg

Mr Harry logo.jpg


Harry (1).jpg


Full details above

Salsa Firestarter Plus


Firestarter 110 Deluxe is our high-modulus carbon fork for all-terrain riding. Dual sets of Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes.

  • High-modulus carbon fiber construction

  • Tapered 1-1/8" to 1-1/2" steerer tube

  • Axle-to-crown: 483mm

  • Fork rake: 51mm

  • 110 x 15mm thru-axle

  • 160mm minimum rotor size; 180mm maximum rotor size

  • 27.5 x 2.8–3.0" or 29 x 2.2–3.0" tire fit

  • Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles

  • Mid-blade mounts for low rider racks

  • Internal routing for 110 boost dynamo hubs

  • Fender mounts (compatible with 29 x 2.2" tire maximum)

Ole Smokey.jpg


The things you need to know.

  • Material: - Titanium grade 9 (3Al/2.5V)

  • Headset Size: -   Top cup = IS 42  , Lower cup = IS 52

  • Bottom bracket type, BSA, 68mm.

  • Rear Axle: -   12 x 148mm bolt through.

  • Seat Post Size:  -   31.6mm

  • Seat Clamp Size: - 34.9mm (Included)

  • Dropper Post:  -  Internal Stealth cable routing, 31.6mm

  • Sizes:  -  XSmall, Small, Medium, Large, XLarge.

Warranty - 5 years for the original owner.

workshoptool mono.jpg


Mr Harry Geo Chart.


Mr Harry has been designed to offer several tyre options making this bike very versatile.

All of the tyres below have been fitted on the same wheels, 29 Halo Vapour 35's, which are 30mm internal, 35 outer.

You can of course choose your rim/wheels.

Mr Harry in 29 x 2.8. mode

29 X 2.8 TYRES

Mr Harry in 29x2.25 mode

29 X 2.25 TYRES

Mr Harry in 700x40 mode.

700 X 40 TYRES



What fits what

We are a great believer in keeping things simple, try and use standards that exist and components that you can get in most bike shops. 

Bow Ti Bottom Bracket.jpg


We use a proper British threaded bottom bracket suitable for all type of crank. The width is 68mm. You can fit 24mm, 30mm and the new DUB axle size cranks with the suitable threaded bottom bracket.

Bow Ti Headtube


Integrated headset size IS42 top and IS52 lower. This type of headset does not require cups to be pressed into the frame as the bearings sit directly into the frame.