The frame.

The HarryBow frame is the Andy Deacon special really. Andy is our brand ambassador and gives us great feedback and ideas.

As the name suggests, theres a link to two of our other models, here and you’d be correct in that assumption. Andy has owned and ridden both the BowTi and the Mr Harry and found his perfect setup to be smack in the middle, The drop bar front triangle of the Mr Harry and the rear of the BowTi. This means you keep the advantage of the fatbike spacing/clearance and match it up to the shorter top tube needed for a drop bar bike.

Despite the frame having fatbike clearance this frame is mainly aimed at a 29er setup, offering plenty of room.

Full tech spec is at the bottom of the page.

Features.

The main features are much the same as our other frames, 3 x anything cage mounts, top tube bag mount, rear rack mounts andsuper-clean guided internal cable routing.

As mentioned you also have the increased rear tyre clearance over the standard Mr Harry and the ability to run a wider frame bag due to the wider bottom bracket.

Suspension forks are an option with 100mm being the ideal travel and if running a 29er setup, a boost spaced (110mm) fork is the perfect addition.

Rear axle spacing is 177mm, with a 100mm bottom bracket.

A sliding rear dropout is standard allowing you to run single speed if you wish.

The ultimate gravel bike?

If you want the ultimate, do anything, go anywhere gravel bike then this is it. Choose your tyres, super fast rolling, enjoy the comport of a larger volume tyre and save your teeth on the rough stuff and fit a suspension fork if you wish, although that larger tyre may mean you don’t need too.

Right now we see traditional gravel bikes being adapted to cope with the roughness of the trails, suspension stems and set post, super short travel suspension forks and squeezing the largest tyes in leaving little to no tyre space.

The solution is right here.

Options.

Because all of our frames are made to order we can alter things to suit you needs, and normally at no extra cost.

Things such as tweaked the sizing, internal, or external cable routing, sliding or fixed dropouts, pinion of traditional can all be catered for.

Along with all our frames should you with to go for a pinion setup the frame comes with a splitter to allow for the fitment of a Gates belt drive system.

We are happy to discuss anything should you need any further information

Technical information.

  • Headset Size: -   Top cup = IS 42  , Lower cup = IS 52

  • Rear Axle: -   12 x 177mm (Bolt through axle included).

  • Bottom bracket - 100mm x BSA standard threaded. (Non-Pinion)

  • Seat Post Size:  -   31.6mm

  • Seat Clamp Size: - 34.9mm (Included)

  • Dropper Post:  -  Internal Stealth cable routing.

  • Cable Routing - Internal cable routing (Guided). (External Option)

  • Pannier rack mounts.

  • 3 x anything cage mounts.

  • Sliding or fixed dropouts

  • Sizes:  -  XS Small, Medium, Large, X-Large

  • Max tyre size - 26x4.0, 27 x 4.0, 29 x 3.0

  • Suspension fork travel - 100 to 120mm

geometry.

Complete bikes.

We offer a complete spec, which is built by our parent company Slam69 bike shop.

We use Hope Technology for a lot of the components, along with our own Rims. Forks can be either rigid, Rockshox or Manitou.

Tyres are from Schwalbe.

Contact for a quote here

PRICING.

  • Frame only - includes rear axle, seat clamp : £2100.

  • Fatpacker carbon fork : £350.

  • Complete bikes - POA

We prefer to meet you and make sure you get the frame/bike you really want, but you contact us and purchase online.

Our titanium frames are made to order in the China, in a small high end bespoke manufacturer. High quality is top of our priorities.

Complete bikes are built by our parent company Slam69 bike shop where pricing and spec can be discussed

We do take order internationally, again contact us for details. See email below.